Product ID:N1000 (KU)
MSDS Date:08/27/1993
FSC:9150
NIIN:00N025060
MSDS Number: BXQBL

Emergency Phone: 800-424-9300 (CHEMTREC)

Info Phone: 814-353-8030

Cage: IO169

Telephone: 814-353-8030

Cage: IO169

BUTENE, POLYMERS; (POLYBUTENE)

CAS: 9003-29-6

RTECS: EM9032000

Fraction By Weight: 100%

OSHA PEL N/K

ACGIH TLV: N/K

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: NO SIGNIFICANT HEALTH HAZARDS
IDENTIFIED. CHRONIC: UNKNOWN.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:UNKNOWN.

First Aid:INHALATION: IF ADVERSE EFFECTS OCCUR, REMOVE TO
UNCONTAMINATED AREA. GET MEDICAL ATTENTION. EYES: FLUSH EYES WITH
PLENTY OF WATER FOR AT LEAST 15 MINUTES. SKIN: WASH EXPOSED SKIN
WITH SOAP AND WATER. INGESTION: IF LARGE AMOUNT IS SWALLOWED, GET
MEDICAL ATTENTION.

Flash Point:>270F,>132C
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, WATER SPRAY.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE.

Spill Release Procedures:CONTAIN ON ABSORBENT MATERIAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:NO SPECIAL REQUIREMENTS.
Other Precautions:NONE.

Respiratory Protection:NIOSH/MSHA APPROVAL REQUIRED ON ANY RESPIRATORY
EQUIPMENT USED.
Ventilation:LOCAL EXHAUST IS REQUIRED IF MIST IS GENERATED.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:NOT APPLICABLE.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
SPEC GRAV: 0.85-0.91 (H*2O=1).

Boiling Pt:B.P. Text:>430F,>221C
Vapor Pres:1 @ 250F
Spec Gravity:SUPDAT
Solubility in Water:INSOLUBLE
Appearance and Odor:CLEAR LIQUID; HYDROCARBON ODOR.

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE,
ALDEHYDES, KETONES, COMBUSTION PRODUCTS OF NITROGEN.
Conditions to Avoid Polymerization:DEPOLYMERIZES WHEN SUBJECTED TO HIGH
TEMPERATURE OR COMBUSTION.

Waste Disposal Methods:INCINERATE. FEDERAL, STATE AND LOCAL REGULATIONS
GOVERN DISPOSAL OF OIL WASTE.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.